|
MATTASIA.COM - Home
|
MATTASIS.COM - Waterproofing
|
|
|
|
|
From now on, you can find the solutions for the waterproofing
problems.
  
Water tanks click here.
|
Roofs
and decks |
|
Product |
Type |
Properties |
Uses |
| T
201 |
Acrylic
Based liquid -applied membrane |
elongation
>350% |
Roofs,
deck, wall |
| T
200 |
Water
based PU, liquid applied membrane |
elongation
>350% , can resist to ponding water |
Flat
roofs, deck, wall, gutter, small ponds, etc |
| PU
100* |
3-layer
Polyurethane membrane (1-3 mm) |
elongation
>700%, can resist to ponding water |
Flat
roofs, deck, wall, gutter, small ponds, carparks,
etc |
| T
202 |
Ceramic
coating |
Relect
Heat and UV |
Roofs,
deck, wall |
| T 203
|
High elastic ceramic coating |
High elongation >700%, Heat reflection |
Roofs,
deck, wall |
| T
304 |
High
elastic flexible cement |
elongation
>100%, can resist to ponding water |
Flat
roofs, deck, wall, gutter, small ponds, etc |
|
Others
Waterproofing systems |
| T
100 |
Water
based PU and modified bitumen membrane |
high
elongation >500%, |
Retaining
wall, basement, bahtroom, balcolny, tanks, swimming
pools, under tile aplication,etc |
| T
305 |
Economic
Flexible Cement membrane |
flexible,
elongation > 20%,able to be immerged in water,
non toxic |
Retaining
wall, basement, bahtroom, balcolny, potable water
tanks,swimming pools, under tile aplication, etc |
| E501
LN |
Epoxy
tank lining |
strong
surface, high resistance to chemicals, colored or
clear coating |
balcolny,
potable water tanks, waste water tanks, etc |
| T
303 |
2-component,
Moisture barrier, polymer-modified cement |
self
leveling, resist to hydrostatic pressure |
Mosisture
barrier for epoxy coating, floor toppings, etc |
| T308 |
Crystalline
cement |
seal
the capillaries and minor shrinkage cracks up to
0.4mm |
Foundation
wall and slab, potable water tanks, reservoirs,
sewage , Swimming pools Tunnels |
| R
290 |
Silane/siloxane
coating |
Water
repellent, high liquid, high penetration |
Brick
works, natural and artificial stone, etc |
|
Repairs
and Injections |
| PU
108 |
1K
Hydrophobic PU |
Semi-flexible
rubber-like foam |
Crack
injection |
| PU
168 |
1K Hydrophillic PU |
React
with water, very flexible rubber-like foam |
Crack
injection |
| E
504 LP |
Low
pressure epoxy injection |
High
mechanical strength, low viscosity |
Crack
injection |
| HP
023 |
Injection
machine |
15000
psi pressure, light weight only 9 kg |
Crack
injection |
  
|
| ........................................................................................................................................................................ |
|
|
| |
| |
| |
|
|
|
Un title page
|
MATT ASSOCIATE CO.,LTD.
123 Soi Onnuch 64 Onnuch Rd., Suanluang, Suanluang, Bangkok 10250
Tel
:66-2-7211741 Fax 66-2-7211751
Copyright
© 2004.By mattasia.com.All Rights Reserved
|
|