|
|
In Thailand, most of the slab is on ground and the moisture cause many problems for (blistering, bubbles, etc.)floor topping like epoxy, vinyle tile or etc.
|
There are a few solutions for this problem but this is one of the new system we can use to solve the moisture problem.
Step 1: prepare the substrate by shotblasting.
Step 2: Apply PENTENS T007 (mixed with 3 parts of clean water) by roller
Step 3: Mix Pentens T303 Moisture Barrier (part A liquid 20 kg+ part B powder 25 kg) by mixer.
Step 4 : Apply Pentens T303 by trowel or squeegee.
Step 5 : Leave T303 to harden for at least 1 days, and then apply the floor topping as required.
(At this step, it is necessary to check the surface moisture, for example, if T303 is still dark color at 24 hours, we have to apply more T303 and wait for another 24 hours before application)
